Static VS Dynamic Calibration; Why Does a Car Need to Be Recalibrated in Mesquite, TX?

When it’s in the shop, your car may also be “calibrated”, and its much like a chiropractor visit for your car. As they should and adjusted if needed, they are checking to make sure all the systems are working properly and aligned. Systems like cameras can still get jostled around even if you’ve been in a low-speed accident. It beeps if you get too close to an object as the shop may recalibrate your backup camera for example. Since the car didn’t realize how close you were, it can translate to you hitting something behind you if your backup camera isn’t calibrated correctly, even by a millimeter. Today, we at Top Notch Body Shop & Mechanic would like to discuss calibration and its importance.

What Do You Mean By Static VS Dynamic Calibration?

Your repair shop may perform one of two types of calibrations to see if these systems are set correctly.
Static: Using tools like laser levels, a calibration is done by putting your car on a level surface and measuring specific aspects. Basically, looking to see if your car’s elements meet the manufacturer targets, down to the millimeter or fractions of a degree is the process.
Dynamic: When being tested, dynamic calibrations mean your vehicle is in motion if static calibrations involve a car in park. To verify that systems are working as they should, the shop will likely take your car out on a busy road.

Why is Post Calibration Important?

1) Reliability & Accuracy. In our vehicle, we are on numerous indicators, radars, and cameras installed. The more vulnerable they may be for a trivial physical impact the more advanced all those systems are, however. The adequate work of those orientation systems leading to severe accidents, just a 1-degree inaccuracy can severely compromise. A reliable mechanic will conduct a thorough after-repairment diagnostics using certified tools that provide access to the vehicle’s-built data to check the systems` accuracy and determine whether any calibration is needed.
2) The new normal are OEM Repair Procedures. Few people know how to perform the safest and most efficient repair of your vehicle than the Original Equipment Manufacturer. When it comes to post-collision restoration and calibration, the OEM takes the primary position. One manufacturer to another, modern car systems are pretty complicated and often tend to differ dramatically. Making sure that your service provider is familiar particularly with your vehicle’s OEM, is able to follow the standards, and calibrates all the systems according to them after each manipulation is essential.
3) Prioritize Safety. Because it is related to systems aimed to provide your safety and safety of your passengers while driving, post-collision calibration is essential. Your life comes at a risk, once one of the cameras, detectors, blind-spot monitors, and lane-assist technology seems to work normally and don’t send any warning signals but are, in fact, off. You keep relying on the customary systems and can get into a new accident right on the way from the service station to your house, unaware of the problem.

Custom Paint & Auto Repair & Body Shop Services in Dallas, Texas (Just Minutes Away from Addison, Balch Springs, Carrollton, Cedar Hill, Coppell, DeSoto, Duncanville, Farmers Branch, Ferris, Garland, Grand Prairie, Grapevine, Irving, Lancaster, Lewisville, Mesquite, Ovilla, Richardson, Rowlett, Sachse, Seagoville, Sunnyvale & Wylie, TX)

For a safe and properly functioning vehicle, calibrated systems are essential. Any OEM today requires thorough and qualifies post-collision calibration of all systems for a reason. It is not a matter of your time and money, but literary a question of life and death for you and your passengers, even if it might initially seem that they have not been impacted or damaged during the previous accident, unlike numerous other issues. For calibration services in the Greater Dallas, TX area, call in the experts of Top Notch Body Shop & Mechanic and let us assist you!

Call Now Button